Winter Sales Event Through End of the Year! All Pricing Has Been Reduced. Get Ready for Spring Next Year. It's Right Around The Corner!

SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)
SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)

SC300/400/Soarer - LED Fog Lamp Kit (97+ Bumpers ONLY)

Regular price $299.00 $240.00 Sale

AutoExtrude Design

The fog lamp kit is built with an OEM inspired design with a slightly modified appearance. It's been built shorter compared to the factory fog lamps, giving you a great deal of intercooler clearance and a familiar feel. The entire fog lamp and bracket system are built with an all-weather resistant plastic and all fasteners are made of nylon for years of continuous road abuse. 

We all have seen broken factory lamps so we needed to build a front face that is very strong and won't crack, dent profusely or look horrible after years of continuous use. That being the case, we made the front face almost 1-inch thick! to provide the necessary robust front face you really need from a product like this being very low to the ground getting abused from road debris on a consistent basis. 

This fog lamp system will fit any bumper that can mount the stock 97+ fog lamps.

I also would like to emphasize that the fog lamps are over 3 inches shorter than the factory fog lamps! Leaving you with a heck of a lot more room to fit intercooler piping. I know many of you have taken out their factory fog lamps to make clearance for the intercooler piping. I have no doubt you’ll find the space now AND be able to have the led fog lamps mounted in! 

We have provided an almost 100% Plug n' Play solution for you. These can be installed on your SC300 / SC400 / Toyota Soarer in a matter of minutes and offer you years of sure-fire continuous use. 

Fog Lamp Type 

The fog lamp is built around the Morimoto 70mm LED Fog Lamp. This is the heart & soul of our LED Fog Lamp Kit. This LED Fog Lamp offers an extremely robust set of specifications as well as the incredible 10-YR Warranty from a world-renowned manufacture like Morimoto

Morimoto XB LED projector fog lamps look great, are very well-built, a performance that is bar-none. They have a virtually infinite lifespan and an unbeatable warranty. 

Don't be confused by eBay/amazon brands out there that offer a subpar warranty, inferior optics and make false promises. The Morimoto XB LED Fog Lamps are backed only by the best lighting manufacturer in the game and offer the best optics and performance you deserve.

The Morimoto XB LED foglamps are powered by three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light.  Make no mistake, these will produce a much different (better) result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations. 

Note: You will need to replace your factory connector for a proper and updated 9006 weather-proof connector (included). 

Yellow Lamp

Currently, Morimoto, the manufacture of the LED Fog Lamps themselves has stated they are working on a 3000k diodes for their foglamp lineup but no official word has been dropped. Good thing is, if they ever end up offering it, you'll be able to swap lamps in a matter of minutes. 

Until then, this option on the website is reserved for a Yellow Lamin-X Film added to your order. The lamp will look Yellow when it's turned off and it will shine some yellow reducing your glare. 

Brake Duct

We have created a brake duct option. It is the same size and shape as the fog lamp version but with a 2.5-inch flange on the rear so that the end-user can attach a high-temp brake hose if need be. Using a high-temp brake hose isn't necessary, so feel free to rock them as a duct and/or paint to match them with the color of the vehicle. 

Color Choice

The color choice upon checkout is for the plastic surround. In the pictures, I have only shown you the black. A Gray color is possible. As I get more pictures back from people, I will update the website with pictures of them. 

Painting & Sanding

Totally unnecessary. We print these in a very nice quality finish and can and should be used as they are, out of the box! But.... if you're inclined to paint them to match your vehicle, they will handle paint just like any other ABS plastic. They sand down very smooth and can handle any automotive paints. 

........in the end, 

We are extremely proud to finally offer our LED Fog Lamp Kit to the JZZ30 Chassis around the world.  We have painstakingly designed every detail to meet and exceed OEM standards but more importantly, your expectations. At the moment right now, we are only offering this to 97+ SC Lexus / Toyota Soarer bumpers. If we see a good amount of people purchasing these for their 97+ Bumper, then we will focus our attention on the 92-96 bumpers.