Fog Lamp Type
The fog lamp is built around the Morimoto 70mm LED Fog Lamp. This is the heart & soul of our LED Fog Lamp Kit. This LED Fog Lamp offers an extremely robust set of specifications as well as the incredible 10-YR Warranty from a world-renowned manufacture like Morimoto.
Morimoto XB LED projector fog lamps look great, are very well-built, a performance that is bar-none. They have a virtually infinite lifespan and an unbeatable warranty.
Don't be confused by those cheap eBay/amazon brands out there that offer a subpar warranty, inferior optics and make false promises. The Morimoto XB LED Fog Lamps are backed only by the best lighting manufacturer in the game and offer the best optics and performance you deserve.
The Morimoto XB LED foglamps are powered by three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different (better) result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.
Our fog light system also have the ability to adjust the “pan and tilt” Meaning, you can set and focus your light beam output perfectly to give you the best night time driving experience.
DOT, ECE, SAE Standards
The Fog Lamps are fully road legal in compliance with US, EU and other counties laws and regulations
The fog lamp kit is built just like the OEM design, giving you a great deal of intercooler clearance and a familiar feel. The bracket system is built with an all-weather resistant plastic and all fasteners are made of stainless steel metal that is made for years of continuous abuse.
We all have seen broken factory lamps so we needed to build a front face that is very strong and won't crack, dent profusely or look horrible after years of continuous use. That being the case, we made the front face almost 1-inch thick! to provide the necessary robust front face you really need from a product like this being very low to the ground getting abused from road debris on a consistent basis.
We have provided an almost 90% plug n' play solution for you. These can be installed on your Supra in minutes and offer you years of sure-fire continuous use.
Note: You will need to cut and replace your factory connector for a proper and updated 9006 weather-proof connector (included).
The LED upgrade kit is offered in multiple different variations to meet your particular taste or situation:
- Brake Duct (see other listing)
- Delete Plate (see other listing)
This diamond front face pattern gives you an OEM appearance is built to give the end user the ability to retain a factory feel with some modification. This pattern will handle rocks and debris very well considering it has a textured face. A dent, ding, or scar will be hard to see with the diamond pattern.
Natures ideal pattern for efficiency and structure. It provides a similar resistance to rocks and debris like the Diamon pattern but with a different appearance. The honeycomb is one of my favorite patterns.
This design was set up for those of you that decide you don't want any pattern OR would like to paint the front face in any way, shape or form. I think this could be an awesome base for someone that wanted to throw some paint on the front face or even a little wrinkle black!
Brake Duct (See our other listing...)
The brake duct is a must have when it comes to any Supra. This design gives the end user a funneled shape to guide high-pressure air that builds up in front of the car as you gain speed. The orifice at the back of the duct is just under 2.5" in diameter so you can grab any 2.5" high-temp brake hose and guide it to your brake calipers. You may not even want to use this for your brake rotors but merely love the appearance onto itself, we're cool with that too!
Delete Plate (See our other listing....)
Slightly inspired by the STi foglamp cover. Perfect for those of you that do not want fog lamps or a brake duct. A simple delete plate that gives you a way to fill in the fog lamp hole and gives a very clean and simple look.
Currently, Morimoto, the manufacture of the LED Fog Lamps themselves has stated they are working on a 3000k diodes for their foglamp lineup but no official word has been dropped. Good thing is, if they ever end up offering it, you'll be able to swap lamps in a matter of minutes.
Until then, this option on the website is reserved for a Yellow Lamin-X Film added to your order. The lamp will look Yellow when it's turned off and it will shine some yellow reducing your glare.
........in the end,
We are extremely proud to finally offer our LED Fog Lamp Kit to the MK3 Supra Community. We have painstakingly designed every detail to meet and exceed OEM standards but more importantly, your expectations.